CONTROL TECHNIQUES Commander SKB3400110 1.1kW 2.8A 380 - 480VAC Variable Frequency Drive

Description
Control Techniques Commander SK Series AC Inverter for 1.1kW (1.5HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 2.8A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V for a standard AC Induction motor.
Control Techniques' Commander SK is easy to use and offers great value. The drive modules are compact and offer excellent motor control. With onboard intelligence, I/O, Ethernet and fieldbus communications options, Commander SK allows you to do far more than you would expect from a standard open loop drive.
The Commander SK has been designed to be a simple, compact, cost effective AC motor speed controller that delivers performance with simplicity and ease of use. With all the parameters you need for 90% of applications printed on the front of the drive, Commander SK ensures installation and commissioning are straight forward. However, for more demanding applications, Commander SK can deliver benchmark functionality at no added cost to the base drive itself.
Specifications
Size B: 85mm Wide x 156mm Deep x 205mm High. IP20
Weight: 1.3kg.
Overload: 150% x 60 seconds
Speed Control Range: 0-1500Hz
Braking: Minimum 100 Ohm, Maximum 3.4kW external resistor (not supplied) - use the 'Which Resistor' button on this page.
1 Analogue Input, 1 Analogue/Digital Input, 4 Digital Inputs, 1 Analogue Output, 1 Digital Input/Output, 1 Relay Contact set, RJ45 port for Modbus.
Input Current: 4
Input Voltage: 380-480V Three Phase ±10% at 50-60Hz ±5%
EMC Filters: EN 61800-3:2004 Second Environment (Industrial). Can be disabled using pull-tab.
Wall mount in clean environment or cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 10mm (0mm between drives).
Heat Loss at max output: 43W (at rated ambient temperature and default switching frequency).
Mounting via 35mm DIN rail or 4 x holes at rear for M4 screws on 55mm x 190mm centres.
Manufacturer part number is SKB3400110. Replaces Commander SE.
Keypad and display
The keypad and display are used for the following:
•Displaying the operating status of the drive
•Displaying a fault or trip code
•Reading and changing parameter values
•Stopping, starting and resetting the drive
Unidrive M: compatibility with Commander SK and Unidrive SP
Mechanical
• Compatible physical dimensions, weights and surface mount footprint.
• When retrofitting surface mount drives, existing mounting holes can be reused-negating the need for additional drilling. Mounting holes are in the same place or retrofit kits are available.
Electrical
• Power and control wiring adopt the same philosophy as Commander SK and Unidrive SP.

Some Similiar Drive